FENCE_AGENT(8)

NAME
fence_netio - Power Fencing agent for Koukaam NETIO-230B

DESCRIPTION

fence_netio is a Power Fencing agent which can be used with the Koukaam NETIO-230B Power Distribution Unit. It logs into device via telnet and reboots a specified outlet. Lengthy telnet connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.koukaam.se/

PARAMETERS

-o, --action=[action]
    Fencing action (Default Value: reboot)

-a, --ip=[ip]
    IP address or hostname of fencing device This parameter is always required.

-u, --ipport=[port]
    TCP/UDP port to use for connection with device (Default Value: 1234)

-p, --password=[password]
    Login password or passphrase

-S, --password-script=[script]
    Script to run to retrieve password

-n, --plug=[id]
    Physical plug number on device, UUID or identification of machine This parameter is always required.

-l, --username=[name]
    Login name This parameter is always required.

-q, --quiet
    Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v, --verbose
    Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

--verbose-level
    Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

-D, --debug-file=[debugfile]
    Write debug information to given file

-V, --version
    Display version information and exit

-h, --help
    Display help and exit

--plug-separator=[char]
    Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

-C, --separator=[char]
    Separator for CSV created by 'list' operation (Default Value: ,)

--delay=[seconds]
    Wait X seconds before fencing is started (Default Value: 0)

--disable-timeout=[true/false]
    Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

--login-timeout=[seconds]
    Wait X seconds for cmd prompt after login (Default Value: 5)

--power-timeout=[seconds]
    Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]
    Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]
    Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--stonith-status-sleep=[seconds]
    Sleep X seconds between status calls during a STONITH action (Default Value: 1)

--retry-on=[attempts]
    Count of attempts to retry power on (Default Value: 1)

--telnet-path=[path]
    Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

on  Power on machine.

off Power off machine.

reboot
    Reboot machine.

status
    This returns the status of the plug/virtual machine.

list
    List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status
    List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

monitor
    Check the health of fence device

metadata
    Display the XML metadata describing this resource.

manpage
     The operational behavior of this is not known.

validate-all
    Validate if all required parameters are entered.

STDIN PARAMETERS

action
    Fencing action (Default Value: reboot)

ip  IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr

ipport
    TCP/UDP port to use for connection with device (Default Value: 1234)

password
    Login password or passphrase Obsoletes: passwd

password_script
    Script to run to retrieve password Obsoletes: passwd_script

plug
    Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port

username
    Login name This parameter is always required. Obsoletes: login

quiet
    Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose
    Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

verbose_level
    Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

debug_file
    Write debug information to given file Obsoletes: debug

version
    Display version information and exit

help
    Display help and exit

plug_separator
    Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

separator
    Separator for CSV created by 'list' operation (Default Value: ,)

delay
    Wait X seconds before fencing is started (Default Value: 0)

disable_timeout
    Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

login_timeout
    Wait X seconds for cmd prompt after login (Default Value: 5)

power_timeout
    Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait
    Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout
    Wait X seconds for cmd prompt after issuing command (Default Value: 3)

stonith_status_sleep
    Sleep X seconds between status calls during a STONITH action (Default Value: 1)

retry_on
    Count of attempts to retry power on (Default Value: 1)

telnet_path
    Path to telnet binary (Default Value: /usr/bin/telnet)